Tong Sealer hpl WSZ
The hpl WSZ heat sealing tongs seal heat-sealable films and materials such as coated aluminium film, coated paper or painted cellophane easily and regardless of location.
With the hpl WSZ TB design, the sealing material is stopped from sticking by a PTFE coating on the sealing rails. A 12 mm (0.47 inch) ripped seal and constant temperature distribution over both sealing bars ensure a fast and reliable sealing process.
An optionally available table clamp means that the tongs can also be used as a static table model. The tongs are available in bar widths of 300 and 400 mm (12 and 16 inches).
|TECHNICAL DATA||hpl WSZ 200
hpl WSZ 200 TB
|hpl WSZ 300
hpl WSZ 300 TB
|hpl WSZ 400
hpl WSZ 400 TB
|Seal seam length||200 mm||300 mm||400 mm|
|Seal seam width||12 mm||12 mm||12 mm|
|Sealing temperature (infinitely adjustable)||50 – 220 °C||50 – 220 °C||50 – 220 °C|
|Time of pre-heating approx.||5 mins||5 mins||5 mins|
|Heating||via stamp above and below||via stamp above and below||via stamp above and below|
|Power||350 VA||350 VA||350 VA|
|Mains connection||230 V / 50 Hz||230 V / 50 Hz||230 V / 50 Hz|
|Weight||1.5 kg||1.5 kg||1.5 kg|
Note: Specifications subject to change without prior notice.
hpl TK Table clamp